ATM

From: Ben Rife (brife@xxxxxxxxxx)
Date: Mon Jul 12 1999 - 17:23:39 GMT-3

• Next message: Derek Fage: "RE: ATM"
• Previous message: Pamela Forsyth: "Re: Route Maps"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
   Hi Guys,
   
       I'm on a CAT5 with a LANE card. I'm trying to configure LANE,
   right now I'm trying to configure the LEC/LECS/BUS/LES. Here's my
   config thus far:
   
   interface ATM0
    atm pvc 1 0 5 qsaal
    atm pvc 2 0 16 ilmi
    lane auto-config-atm-address
   !
   interface ATM0.1 multipoint
    lane server-bus ethernet elan1
    lane client ethernet 1
   
   I don't know how/where to configure the ATM address for each service
   though. When I enter "sh lane default" here's what I get:
   
   ATM#sh lane def
   interface ATM0:
   LANE Client: ...00602F7FCD40.**
   LANE Server: ...00602F7FCD41.**
   LANE Bus: ...00602F7FCD42.**
   LANE Config Server: ...00602F7FCD43.00
   note: ** is the subinterface number byte in hex
   
   Any ideas? Thanks.
   
   1 day away...
   
   Benjy Rife
   MCSE, CNE, CCIE Candidate
   brife@bignet.net
   www.bignet.net/~brife

• Next message: Derek Fage: "RE: ATM"
• Previous message: Pamela Forsyth: "Re: Route Maps"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:42 GMT-3