From: Fred Ingham (fningham@xxxxxxxxxxxxxxxx)
Date: Thu Aug 12 1999 - 00:25:18 GMT-3
Do you have ip subnet-zero on r5? Can you ping the addresses in the
remote-peer statements?
Bill Carter wrote:
>
> What am i doing wrong here??
> R5#
> source-bridge ring-group 1000
> source-bridge remote-peer 1000 tcp 150.100.40.4
> source-bridge remote-peer 1000 tcp 150.100.5.5
> interface TokenRing0/0
> ip address 150.100.5.5 255.255.255.224
> no ip directed-broadcast
> ring-speed 16
> source-bridge 5 1 1000
> source-bridge spanning
>
> R4#
> source-bridge ring-group 1000
> source-bridge remote-peer 1000 tcp 150.100.5.5
> source-bridge remote-peer 1000 tcp 150.100.40.4
> interface TokenRing0/0
> ip address 150.100.40.4 255.255.255.0
> no ip directed-broadcast
> ring-speed 16
> source-bridge 4 1 1000
> source-bridge spanning
>
> r4#sho source-bridge
>
> Local Interfaces: receive transmit
> srn bn trn r p s n max hops cnt cnt
> drops
> To0/0 4 1 1000 * f 7 7 7 0 0
> 0
>
> Global RSRB Parameters:
> TCP Queue Length maximum: 100
>
> Ring Group 1000:
> This TCP peer: 150.100.40.4
> Maximum output TCP queue length, per peer: 100
> Peers: state bg lv pkts_rx pkts_tx expl_gn
> drops TCP
> TCP 150.100.5.5 closed 3 0 0
> 0 0 0
> TCP 150.100.40.4 - 3 0 0
> 0 0 0
> Rings:
> bn: 1 rn: 4 local ma: 400a.7cc7.7487 TokenRing0/0 fwd:
> 0
>
> Explorers: ------- input ------- ------- output -------
> spanning all-rings total spanning all-rings
> total
> To0/0 0 0 0 0 0
> 0
>
> Explorer fastswitching enabled
> Local switched: 0 flushed 0 max Bps 38400
>
> rings inputs bursts throttles output
> drops
> To0/0 0 0
> 0 0
>
> --
> ~~~~~~~~~~~~~~~~~~~~~~~~
> Bill Carter
> Favorite Quote
> "bodega stuck again... "
> -Cisco Bug CSCdk37204
> ~~~~~~~~~~~~~~~~~~~~~~~~
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:46 GMT-3