From: Jason Aarons (jaarons@xxxxxxxxxxx)
Date: Sun Sep 05 1999 - 12:34:37 GMT-3
If I make it to day two, then judging from the website's lab equipment list,
I expect to get 1 4500-M with a ATM NPM, and 1 Catalyst 5505 with Lane
Module.
http://www.cisco.com/warp/public/cc/cisco/mkt/access/4000/4500_m/prodlit/ds3e3_
pa.htm
I suspect I will be asked to setup something and will have to figure out
whether Static mappings or LANE or Classical IP will fit the situation best.
Anyone have a suggestion on the Cisco Part number for the LANE card that
goes in the Catalyst 5500 ?
----Original Message Follows----
From: James Ramsay <JRamsay@sytec.co.nz>
Reply-To: James Ramsay <JRamsay@sytec.co.nz>
To: "'Mark S. Detrick'" <mark@detrick.com>
CC: ccielab@groupstudy.com
Subject: RE: AppleTalk on ATM
Date: Sun, 5 Sep 1999 16:40:04 +1200
Hey Mark - a couple of quick questions...
You have used ATM SVC's - Could you have used LANE or PVC's (RFC1483)?
Did you go to a lab that was equiped with 2 ATM attached routers or is this
your own test lab set-up.
I am under the impression that we will get 1 ATM attached router and a LANE
module for a Cat
Does anyone know which ATM gear we'll get?
Thanks
> -----Original Message-----
> From: Mark S. Detrick [SMTP:mark@detrick.com]
> Sent: Saturday, 4 September 1999 18:08
> To: ccielab@groupstudy.com
> Subject: AppleTalk on ATM
>
> Let's file this one under... "If I knew then what I know now"
>
> Got the AT over ATM working. Some things to consider:
> 1. Make a separate subinterface for each protocol
> 2. ARP server (RFC1577) doesn't work with AT.
> 3. Use map-list for AT
>
> Still need to work with IPX to see how it behaves.
>
> Looking at it now it seems simple. During the exam it was a nightmare.
> Configs below:
>
> Current configuration:
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname router-10
> !
> ip subnet-zero
> appletalk routing
> !
> interface FastEthernet0/0
> ip address 172.24.58.88 255.255.255.192
> no ip directed-broadcast
> !
> interface ATM2/0
> no ip address
> no ip directed-broadcast
> atm pvc 5 0 5 qsaal
> atm pvc 16 0 16 ilmi
> no atm ilmi-keepalive
> !
> interface ATM2/0.1 multipoint
> ip address 100.0.0.2 255.255.255.0
> no ip directed-broadcast
> atm arp-server nsap 47.00918100000000D0D38AF401.00D097D20C00.01
> atm esi-address 00D097D20000.01
> !
> interface ATM2/0.2 multipoint
> no ip directed-broadcast
> atm esi-address 00D097D20000.02
> map-group CCIE
> appletalk cable-range 1-1 1.2
> appletalk zone atm-zone
> !
> ip classless
> ip route 0.0.0.0 0.0.0.0 172.24.58.65
> !
> map-list CCIE
> appletalk 1.1 atm-nsap 47.00918100000000D0D38AF401.00D097D20C00.02
> broadcast
> !
> line con 0
> transport input none
> line aux 0
> line vty 0 4
> login
> !
> end
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:50 GMT-3