From: Brian Van Benschoten (vader@xxxxxxxxxxxx)
Date: Fri Oct 29 1999 - 11:20:02 GMT-3
There seems to be 2 ways shown to configure a pvc
--------------The first method--------------
Interface ATM 0/0/0
IP address 1.1.1.1 255.0.0.0
pvc test-name 0/31
protocol ip 1.1.1.2 broadcast
exit
pvc 0/32
protocol ip 1.1.1.3 broadcast
-------------The second method------------------
INterface ATM0/0/0
ip address 2.2.2.2 255.0.0.0
map-group ccie
atm pvc 1 0 5 qsaal
atm pvc 2 0 16 ilmi
atm pvc 3 1 100 aal5snap
map-list ccie
ip 2.2.2.1 atm-vc 3 broadcast
Is one method older and there for compatibility ? It seems to me that both
do the same function. Do both work with other layer3 protocols ? (IPX, AT,
DEC)
Thanks for any insight you may offer
12 days left...
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:53 GMT-3