Re: AUX0 and Async line configuration

From: DERY, FREDERIC (frederic.dery@xxxxxxxxxxx)
Date: Fri Dec 10 1999 - 19:13:43 GMT-3

• Next message: Brian Van Benschoten: "IP IRDP commands"
• Previous message: Brian Van Benschoten: "Re: AUX0 and Async line configuration"
• Maybe in reply to: Mosley, Arthur: "AUX0 and Async line configuration"
• Next in thread: Mosley, Arthur: "RE: AUX0 and Async line configuration"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Check :

http://www.cisco.com/warp/public/793/access_dial/auxback.html

Hope this help

Frederic Dery

"Mosley, Arthur" wrote:
>
> I have lab scenario that requires the configuration of OSPF in area2 that
> comprises two router connected on side by AUX0 and the other side by Asynch
> 5. How would I configure the line between the two routers(reverse
> telnet,PPP?)? Or is there a source for this type of scenario. Also, are
> there any OSPF related issues?
>
> Thanks,
>
> Art

• Next message: Brian Van Benschoten: "IP IRDP commands"
• Previous message: Brian Van Benschoten: "Re: AUX0 and Async line configuration"
• Maybe in reply to: Mosley, Arthur: "AUX0 and Async line configuration"
• Next in thread: Mosley, Arthur: "RE: AUX0 and Async line configuration"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:59 GMT-3