From: jaime.salazar@xxxxxxxxxx
Date: Wed Jan 19 2000 - 22:38:13 GMT-3
verify that R1 and R3 have the command "Sync" on the routing process. It is the
default.
Jaime
"Ben Rife" <brife@bignet.net> on 19/01/2000 06:50:24 PM
Please respond to "Ben Rife" <brife@bignet.net>
To: ccielab@groupstudy.com
cc: (bcc: Jaime Salazar/Mexico/AMERICAS/Equant)
Subject: BGP
Question:
How do you configure BGP so I can ping in the following senario:
R1----------R2---------R3-----------R4
AS3 AS3 AS4
R2 is not running BGP. I have a loopback on R4, which is in the BGP and Route
tables of R1 & R3. I have a statement on R3 which tells R1, it is the next-hop.
R1 can't ping the loopback on R4, R3 can. What am I missing?
Thanks,
Ben
Question:
How do you configure BGP so I can ping in the following senario:
R1----------R2---------R3-----------R4
AS3 AS3 AS4
R2 is not running BGP. I have a loopback on R4, which is in the BGP
and Route tables of R1 & R3. I have a statement on R3 which tells R1,
it is the next-hop. R1 can't ping the loopback on R4, R3 can. What am
I missing?
Thanks,
Ben
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:45 GMT-3