From: Dawit Birhanu (dawit@xxxxxxxxxxxx)
Date: Sun Jan 30 2000 - 17:17:50 GMT-3
I believe, when you are using LANE on ATM i/f on Catalyst switch, you can
bind an ELAN with a VLAN using the "lane client" interface configuration
command as follows:
lane client ethernet <VLAN id> <ELAN name>
This command has worked for me when I used it on a Cat2820 ATM module.
Dawit
On Sun, 30 Jan 2000, Vijaykrishna wrote:
> Hi all,
>
> As per my understanding ....
>
> - when you are using VLANs with ATM i/f on Cat5500, if you are using PVCs
> then you can assign the pvc to the VLAN with the "atm bind pvc " command.
>
> - when you are using the LANE and defining multiple ELANs and VLANs, the
> only way you can co-relate the two is by having same ELAN and VLAN name so
> by default the ELAN name of the VLAN 1 has to be "default"
>
> Is it correct ?
> any other comment are welcome...
>
> thanks,
> Vijay
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:46 GMT-3