From: Ben Rife (brife@xxxxxxxxxx)
Date: Wed Feb 02 2000 - 00:35:48 GMT-3
Hey everyone, I've configured callback and it works fine. My problem
is with the output of the debug dialer on the server.
It gives a message when it makes the return call of the following:
(also at the bottom)
BRI0:1: No callback negotiated
Does anyone know why I get that "error"?
The dial reson on R3 states "Callback return call", so it appears to
be working, but I'm not 100% sure.
Thanks, Ben
R3# CALLBACK SERVER CONFIG
interface BRI0
ip address 150.100.4.33 255.255.255.248
encapsulation ppp
isdn spid1 0835866201
isdn spid2 0835866401
dialer callback-secure
dialer idle-timeout 60
dialer enable-timeout 2
dialer map ip 150.100.4.34 name R4 class dial1 8358661
dialer load-threshold 1 outbound
dialer-group 1
no fair-queue
ppp callback accept
ppp authentication chap
ppp multilink
!
no ip classless
!
map-class dialer dial1
dialer callback-server username
!
dialer-list 1 protocol ip permit
R4# CALLBACK CLIENT CONFIG
interface BRI0
ip address 150.100.4.34 255.255.255.248
encapsulation ppp
isdn spid1 0835866101
isdn spid2 0835866301
dialer idle-timeout 60
dialer map ip 150.100.4.33 name R3 broadcast 8358662
dialer load-threshold 1 outbound
dialer-group 1
no fair-queue
ppp callback request
ppp authentication chap
ppp multilink
!
no ip classless
!
dialer-list 1 protocol ip permit
~~~~~~~~~~~~~~~~~~~~
R3 - Callback Server
debug dialer output
~~~~~~~~~~~~~~~~~~~~
R3#
%LINK-3-UPDOWN: Interface BRI0:1, changed state to up
BRI0:1:Callback server starting to R4 8358661
BRI0:1: disconnecting call
%ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 8358661 R4,
call lasted
2 seconds
%LINK-3-UPDOWN: Interface BRI0:1, changed state to down
BRI0:1: disconnecting call
: Callback timer expired
BRI0:beginning callback to R4 8358661
BRI0: Attempting to dial 8358661
Freeing callback to R4 8358661
%LINK-3-UPDOWN: Interface BRI0:1, changed state to up
BRI0:1: No callback negotiated
%LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed state
to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1,
changed state t
o up
dialer Protocol up for Vi1
BRI0: Attempting to dial 8358661
%LINK-3-UPDOWN: Interface BRI0:2, changed state to up
BRI0:2: No callback negotiated
%LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:2, changed state
to up
R3#
%ISDN-6-CONNECT: Interface BRI0:2 is now connected to 8358661 R4
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:52 GMT-3