From: Khurram Khani (ajmal@xxxxxxxxxxxxxxx)
Date: Tue Feb 15 2000 - 04:20:57 GMT-3
No, in case of Appletalk the story is exactly opposite. Every router should
have
a different eigrp 'process' number. Its not AS Number in Appletalk case.
----- Original Message -----
From: Bill Dellamar <wdellamar@yahoo.com>
To: Khurram Khani <ajmal@emirates.net.ae>
Sent: Monday, February 14, 2000 10:45 AM
Subject: Re: Appletalk on NBMA
> R1 has eigrp set to 2
> R2 has eigrp set to 1.
>
> Shouldn't they both be in the same AS?
> Thanks,
> Bill
>
> --- Khurram Khani <ajmal@emirates.net.ae> wrote:
> > Thanks for your time Zhen, but the frame-relay intf
> > dlci instruction is
> > already
> > there on the spoke routers, I missed while pasting
> > in email. but you can
> > see the advertisments Appletalk Route tables.
> >
> > Any clue?
> >
> >
> > ----- Original Message -----
> > From: zhencai <zhencai@home.com>
> > To: Khurram Khani <ajmal@emirates.net.ae>;
> > <ccielab@groupstudy.com>
> > Sent: Monday, February 14, 2000 10:05 AM
> > Subject: RE: Appletalk on NBMA
> >
> >
> > > Hi,
> > >
> > > On spoke routers, put "frame-relay interface-dlci
> > xxx" command.
> > > Regards,
> > >
> > > Zhen Cai
> > >
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com
> > [mailto:nobody@groupstudy.com]On Behalf Of
> > > Khurram Khani
> > > Sent: Monday, February 14, 2000 9:25 PM
> > > To: ccielab@groupstudy.com
> > > Subject: Appletalk on NBMA
> > >
> > >
> > > Hello.
> > >
> > > Problem, I am not getting Router 1 Ethernet 0
> > route advertisment in
> > > Router2 and Router 3. Router 1 is advertsing
> > cable-range 1-10 on
> > > Framerelay cloud but other Routers not receiving
> > it ??
> > >
> > > Router 2 ---> HUB (I have put 'no appletalk
> > eigrp-splithorizon and
> > > 'appletalk local-routing' instruction)
> > >
> > > Router 1 ---> Spoke
> > > Router 3 ---> Spoke
> > >
> > >
> > > Router 1 has one "eth 0" and one se2.1
> > point-to-point
> > > Router 2 has one "eth 0" and one se2.1 multipoint
> > > Router 3 has one "eth 0" and one se2.1
> > point-to-point
> > >
> > >
> > > Configurations
> > > ----
> > >
> > > router 1
> > >
> > > appletalk routing eigrp 2
> > > appletalk route-redistribution
> > > appletalk local-routing
> > >
> > > int eth 0
> > > appletalk cable-range 1-10 1.1
> > > appletalk zone Router1Ethernet
> > > no shut
> > >
> > > int se2.1 point-to-point
> > > appletalk cable-range 100-100 100.2
> > > appletalk zone FrameRelay
> > > appletalk protocol ei
> > > no appletalk protocol rtmp
> > >
> > >
> > > Router 2
> > > ----------
> > >
> > > appletalk routing eigrp 1
> > > appletalk route-redistribution
> > > appletalk local-routing
> > >
> > > int eth 0
> > > appletalk cable-range 11-20 11.1
> > > appletalk zone Router2Ethernet
> > > no shut
> > >
> > > int se2.1 multipoint
> > > appletalk cable-range 100-100 100.1
> > > appletalk zone FrameRelay
> > > frame-relay map apple 100.2 101 bro
> > > frame-relay map apple 100.3 104 bro
> > > appletalk protocol ei
> > > no appletalk protocol rtmp
> > > no appletalk eigrp-splithorizon
> > >
> > > Router 3
> > > --------
> > > appletalk routing eigrp 3
> > > appletalk route-redistribution
> > > appletalk local-routing
> > >
> > > int eth 0
> > > appletalk cable-range 30-30 30.1
> > > appletalk zone Router3Ethernet
> > > no shut
> > >
> > > int se2.1 point-to-point
> > > appletalk cable-range 100-100 100.3
> > > appletalk zone FrameRelay
> > > appletalk protocol ei
> > > no appletalk protocol rtmp
> > >
> > >
> > >
> > >
> > >
> > >
> > > router1#
> > > router1#
> > >
> > > (Notice 1-10 is advertised on Se2.1 but other
> > routers are not receving it)
> > > ---
> > >
> > > 02:44:42: AT: atigrp2_advertise_request,
> > advertising 1-10 out Serial2.1
> > >
> > > 02:44:42: AT: atigrp2_advertise_request,
> > advertising 100-100 out Serial2.1
> > > 02:44:44: AT: atigrp2_advertise_request,
> > advertising 1-10 out Serial2.1
> > > 02:44:44: AT: atigrp2_advertise_request,
> > advertising 100-100 out Serial2.1
> > > 02:44:47: AT: atigrp2_rtdelete, deleting 100-100
> > from 100.1 on Serial2.1
> > > 02:44:47: AT: atigrp2_rtupdate, metric 23284736
> > succ 1 for 100-100, is:
> > > 100.1, n
> > > h: 100.1, idb: Serial2.1
> > > 02:44:47: AT: atigrp2_rtdelete, deleting 30-30
> > from 100.1 on Serial2.1
> > > 02:44:47: AT: atigrp2_rtupdate, metric 23310336
> > succ 0 for 30-30, is:
> > 100.1,
> > > nh:
> > > 100.1, idb: Serial2.1
> > > 02:44:47: AT: atigrp2_advertise_request,
> > advertising 1-10 out Serial2.1
> > > 02:44:47: AT: atigrp2_advertise_request,
> > advertising 100-100 out Serial2.1
> > >
> > >
> > >
> > > router2(config)#end
> > > router2#
> > > 02:51:19: %SYS-5-CONFIG_I: Configured from console
> > by console
> > > router2#sh apple ro
> > > Codes: R - RTMP derived, E - EIGRP derived, C -
> > connected, A - AURP
> > > S - static P - proxy
> > > 3 routes in internet
> > >
> > > The first zone listed for each entry is its
> > default (primary) zone.
> > >
> > > C Net 11-20 directly connected, Ethernet0, zone
> > Router2Ethernet
> > > E Net 30-30 [1/G] via 100.3, 1171 sec, Serial2.1,
> > zone Router3Ethernet
> > > C Net 100-100 directly connected, Serial2.1, zone
> > FrameRelay
> > > router2#
> > >
> > > router3#
> > > router3#sh apple ro
> > > Codes: R - RTMP derived, E - EIGRP derived, C -
> > connected, A - AURP
> > > S - static P - proxy
> > > 3 routes in internet
> > >
> > > The first zone listed for each entry is its
> > default (primary) zone.
> > >
> > > E Net 11-20 [1/G] via 100.1, 1185 sec, Serial2.1,
> > zone Router2Ethernet
> > > C Net 30-30 directly connected, Ethernet0, zone
> > Router3Ethernet
> > > C Net 100-100 directly connected, Serial2.1, zone
> > FrameRelay
> > > router3#
> > >
> > >
> > >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:53 GMT-3