From: Aaron DuShey (adushey@xxxxxxxxx)
Date: Mon Apr 03 2000 - 00:33:36 GMT-3
Check the IOS version bugs. I had the same problem on my 804 and it was a
IOS bug. I had to digress to an older version to fix it. Same deal,
establish connection, xfer data, but no spids-
Aaron DuShey
CCNP - CNX - MCSE - CNE - Citrix Specialist - ASE- HP Star
-----Original Message-----
From: Nnanna Obuba [mailto:obuba@yahoo.com]
Sent: Sunday, April 02, 2000 8:25 PM
To: Aaron DuShey; CCIE (E-mail)
Subject: sh isdn status
I'm getting a rather unusual message when I type in this command..The link
gets established (but not multi link), yet the output says 'spids not sent'
Can anyone give me a clue as to what is happening here?
TIA
Nnanna
PS here's the output
r2#sh isdn status
Global ISDN Switchtype = basic-ni
ISDN BRI0 interface
dsl 0, interface ISDN Switchtype = basic-ni
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 65, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Spid Status:
TEI 65, ces = 1, state = 4(await init)
spid1 configured, no LDN, spid1 sent, spid1 NOT valid
TEI Not Assigned, ces = 2, state = 1(terminal down)
spid2 configured, no LDN, spid2 NOT sent, spid2 NOT valid
Layer 3 Status:
1 Active Layer 3 Call(s)
Activated dsl 0 CCBs = 2
CCB:callid=0x0, sapi=0x0, ces=0x1, B-chan=0
CCB:callid=0x1, sapi=0x0, ces=0x1, B-chan=2
The Free Channel Mask: 0x80000001
Total Allocated ISDN CCBs = 2
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:12 GMT-3