From: Rahmlow, Howard F. (howard.rahmlow@xxxxxxxxxx)
Date: Mon Apr 03 2000 - 13:52:24 GMT-3
I agree with scott, make sure you read the whole test, twice before setting
up the address. I got nailed on the last test, by not reading, then had to
change a bunch of addresses, not fun. After that, your on your own. You may
have to set loopbacks, on some routers, and they may give you the address,
and also be told you have to be able to ping all addresses. Check with the
proctor on how he/she wants the loop backs handled.
Howard
-----Original Message-----
From: Scott Morris [mailto:smorris@ccci.com]
Sent: Monday, April 03, 2000 11:19 AM
To: 'Clifton L. Stewart'; ccielab@groupstudy.com
Subject: RE: IP Addressing Scheme
Nope, there's no command that allows vlsm designations to be used instead of
"regular" netmasks. That would take all the fun out of things, now wouldn't
it? :) One of the things you're being tested on is mathematical abilities.
As for the addressing, I'd say it all depends on which way you tend to
think. If you think one direction, and it works, don't force yourself to
change that. The test doesn't specify anything like that, and doesn't care.
Make sure you READ everything first to make sure addresses aren't specified
anyplace. Other than that, address at your leisure.
Results, not process....
Scott Morris, MCSE, CNE(3.x), CCDP (R&S), CCIE (R&S) #4713, Security
Specialization, CCNA - WAN Switching
smorris@ccci.com
----------------------------------------------------------------------------
------------------------------
Chesapeake Network Solutions http://www.ccci.com
Cell Phone: 941-350-8590 e-mail:smorris@ccci.com
Pager: 800-490-1326 Fax: 606-225-8403
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Clifton L. Stewart
Sent: Monday, April 03, 2000 9:52 AM
To: ccielab@groupstudy.com
Subject: IP Addressing Scheme
When doing the addressing for a lab do most people start with the nodes
that will have the most hosts? I am trying to time myself with this
process and wanted to know what the average time is. It usually takes a
hour or maybe a hour and half tops. Thanks for sharing your tips.
Clifton Stewart-CCNA, CCIE Candidate
P.S. Also there is a command that will allow me to specify /26 opposed
to .192 does anyone know what it is? I been seaching through the IOS
docs but can't seem to locate it. I think I could save 10 minutes with
the command.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:12 GMT-3