RE: How to filter NETBIOS in DLSW PEER

From: Goh, Winston (winston.goh@xxxxxxxxxxxxx)
Date: Wed Apr 19 2000 - 09:53:53 GMT-3


   
Hi Chao Yong,
i have test it out and it work. Scenario of test :

eo--apple 200-200 ---r2-----Frame-relay (Appletalk Eigrp)-----r5----e0
(567-567)rtmp----r6

i filter at r5 ethernet 0 with distribution-list out. Filtering cable range
200-200 from r6. 200-200 is route learned from Eigrp not rtmp.
Steps :
create acl 600-699 deny cable range,then permit other-access
apply this to the interface with distribution-list 600 out.
do a reload of your router or alternative reset the appletalk interface so
that eigrp will repropagate the route.

Cheers
winston

-----Original Message-----
From: Li Chaoyong [mailto:hughcyli@holybridge.com.cn]
Sent: Wednesday, April 19, 2000 3:21 PM
To: Goh, Winston; ccielab@groupstudy.com
Subject: Re: How to filter NETBIOS in DLSW PEER

APPLETALK DISTRIBUTE-LIST can only filter RTMP routes, can not filter EIGRP
routes. I tried zip-reply-filter, zone information is filtered, but routes
is still there.

I don't know how to do.

Help, help.

----- Original Message -----
From: Goh, Winston <winston.goh@sg.unisys.com>
To: 'Li Chaoyong' <hughcyli@holybridge.com.cn>; <ccielab@groupstudy.com>
Sent: Wednesday, April 19, 2000 9:00 AM
Subject: RE: How to filter NETBIOS in DLSW PEER

> Hi,
> For your second question, create a access-list 600-699 permit/deny the
cable
> range of the appletalk network. Apply the access-list through appletalk
> distribution-list out under the interface coomand. Remember to permit
> other-access at the end of your acl. i hope this help.cheers
> winston
>
> -----Original Message-----
> From: Li Chaoyong [mailto:hughcyli@holybridge.com.cn]
> Sent: Saturday, April 15, 2000 4:15 PM
> To: ccielab@groupstudy.com
> Subject: How to filter NETBIOS in DLSW PEER
>
>
> I want to know how to configure DLSW peers to allow NETBIOS only.
>
> Use lsap-output-list ?
>
> Please help me.
>
> -----------------------
>
> Another Question
>
> In this condition
>
> R1----------R2
>
> R1 and R2 is runing APPLETALK EIGRP. How to filter EIGRP APPLETALK ROUTE?
>



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:14 GMT-3