From: C. Warren (ccie2000@xxxxxxxx)
Date: Thu Jun 15 2000 - 10:46:51 GMT-3
Regardless of the setting of the break enable bit, a break will cause a
return to the ROM monitor during the first few seconds (approximately five
seconds) of booting
----- Original Message -----
From: "Brian Hescock" <bhescock@cisco.com>
To: "Chandra" <chandra@greenwood.co.nz>
Cc: <ccielab@groupstudy.com>
Sent: Thursday, June 15, 2000 7:03 AM
Subject: Re: If the Break key function is disabled
> Well, if you could configure the config-register that would mean you had
> the password... so I'll I can think of is replacing the NVRAM. Otherwise,
> you probably have bought yourself a nice boat anchor.
>
> Brian
>
> On Thu, 15 Jun 2000, Chandra wrote:
>
> > Hi
> > If the Break key is disabled in the config register, how do we do
password
> > recovery?
> > Regards
> > Chandra
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:42 GMT-3