From: Brian Edwards (bedwards@xxxxxxxxxxx)
Date: Tue Jul 18 2000 - 14:50:40 GMT-3
Last time I answered this question I caused a huge raucus. So I'll try
to be more politically correct this time.
There may be some problems with OSPF demand circuit is some versions
of IOS. The doc states that you should only have to configure demand
circuit on one side of the connection. If this does not work for you
try configuring it on both sides. If it still doesn't work make OSPF
uninteresting in your dialer-list. After that upgrade to 12.0 and try
all these steps again (1 side, both sides, OSPF uninteresting).
In the CCIE lab you may not have the option of upgrading to 12.0, or
you might not want to take the time. In this case, IMHO, make OSPF
uninteresting (verifiy with the proctor if this is acceptable).
/Brian
-----Original Message-----
From: Andy Singh [mailto:ansingh@cisco.com]
Sent: Tuesday, July 18, 2000 9:31 AM
To: ccielab@groupstudy.com
Subject: How to configure OSPF over ISDN/DDR
Hello
Can any1 tell me how to configure OSPF over ISDN line so hello packets
won't bring up the circuit. i think you can do "ip ospf demand
circuit" inteface command but i can't get it to work like that.
i'd appreciate any help
Andy
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:54 GMT-3