From: Keith Kruepke (lister@xxxxxxxxxxx)
Date: Wed Jul 19 2000 - 21:09:50 GMT-3
Ah, yes, TTCP. It took some searching through my bookmarks, but here it some g
ood info:
http://www.ccci.com/product/network_mon/tnm31/ttcp.htm
I haven't looked at this doc in a while, so I'm not exactly sure what it tells
you. I think you need Enterprise to use TTCP (I could be wrong about that), an
d I know that I had to be in enable mode when I tried it.
IMPORTANT: Make sure you realize that this program figures out the link speed
by transfering data as quickly as possible and saturating the link. I'm not su
re how long it does this, but make sure you know what you are doing before you
run it in a production environment! ;-)
Keith
----- Original Message -----
From: "Matt Holbert" <mholbert@icscorp.com>
Cc: <ccielab@groupstudy.com>
Sent: Tuesday, July 18, 2000 9:43 PM
Subject: RE: Undocumented commands
In a Cisco class once a fellow student showed me an undocumented command
that would figure the throughput on a link. Anyone heard of it?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:55 GMT-3