async routing

From: xuping (cnmiecxu@xxxxxxxxxxxxxxxxx)
Date: Tue Jul 25 2000 - 22:20:26 GMT-3

• Next message: Simon Baxter: "BGP communities"
• Previous message: Scott F. Robohn: "Re: understanding NHRP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

>R2 config
>
>interface Async1
> ip address 10.10.10.2 255.255.255.0
> encapsulation ppp
> async dynamic routing
> async mode dedicated
> dialer in-band
> dialer map ip 10.10.10.1 name R3
> ppp authentication chap

Hi

in R2 dialer map, add "brocast", since most routing protcol use brocast or
multicast.

• Next message: Simon Baxter: "BGP communities"
• Previous message: Scott F. Robohn: "Re: understanding NHRP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:58 GMT-3