From: Ray Fisherman (rfish68@xxxxxxxxxxx)
Date: Thu Aug 17 2000 - 09:43:08 GMT-3
Kai,
On the spoke side under the interface enter"ip pim rp-address 10.10.1.1 (hub
ip address)"
On the interface which connect to the frame-relay should state "ip pim nbma"
Good luck to you,
Ray
----- Original Message -----
From: <Kai_Welsch@neef.de>
To: <ccielab@groupstudy.com>
Sent: Thursday, August 17, 2000 5:47 AM
Subject: ip multicast
>
>
>
> Hi All
>
> I got a problem with ip multicast in my frame-relay cloud (1 hub , 2
spokes)
>
> I´ve tried ip pim dense &ip pim sparse dense mode. But i only can ping
from the
> hub to all spokes. The Ospf in the cloud works fine.
> Have anyone an idea or sample config for me ?
>
> 6 days to the second attempt
> regards
>
> Mit freundlichen Grüßen
>
> Kai Welsch / wk , GS KA Systemengineer
> NEEF-Elektrotechnik GmbH & Co
> Systemhaus für Gebäude- und Kommunikationstechnik
> Unternehmen der Sulzer Infra
> Windeckstrasse 9 76135 Karlsruhe
> Tel: +49 721/8606-238 Mobil: +49 172/7271580 *238
> Fax: +49 721/8606-232
> E-Mail/Internet: Kai_Welsch@neef.de
> Notes: Kai Welsch/Infra CS @SULZERINFRA
> Website: http://www.neef.de/
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:27 GMT-3