From: Simon Baxter (Simon.Baxter@xxxxxxxxxxxxxx)
Date: Wed Aug 23 2000 - 02:54:22 GMT-3
No.
Configuration for Router SLC
! Configure pots dial peer 1
dial-peer voice 1 pots
destination-pattern 9...........
port 1/0/0
! Configure voip dial peer 2
dial-peer voice 2 voip
destination-pattern +14085554000
session target ipv4:172.16.1.123
! Configure serial interface
interface serial 0/0
ip address 172.16.65.182
no shutdown
!
Configuration for Router SJ
! Configure pots dial peer 1
dial-peer voice 1 pots
destination-pattern +14085554000
port 1/0/0
! Configure voip dial peer 2
dial-peer voice 2 voip
destination-pattern 9...........
session target ipv4:172.16.65.182
! Configure the serial interface
interface serial 0/0
clock rate 2000000
ip address 172.16.1.123
no shutdown
If the device plugged into router SJ's port 1/0/0 dials any number
which matches 9........... (ie 9876543212) the call will be routed
out SJ's voip peer to 172.16.65.182. When SLC receives that call, it
will route the 9........... to it's POTS peer on port 1/0/0.
Similarly if the device plugged into router SLC's port 1/0/0
dials +14085554000 the call will be routed out SLC's voip peer to
172.16.1.123. When SJ receives that call, it will route the
+14085554000 to it's POTS peer on port 1/0/0.
correct?
-----Original Message-----
From: Kenny Sallee [mailto:mischa@worldshare.net]
Sent: Wednesday, August 23, 2000 4:00 PM
To: Simon Baxter; ccielab@groupstudy.com
Subject: Re: VoIP config example from Doc CD
What I think is wrong is the second destination pattern under the pots
config. So I think this is wrong:
Configuration for Router SLC
! Configure pots dial peer 1
dial-peer voice 1 pots
destination-pattern 9...........
port 1/0/0
And this is right:
Configuration for Router SLC
! Configure pots dial peer 1
dial-peer voice 1 pots
destination-pattern +14085554000
port 1/0/0
Like they had a typo or something.
I'm studying voice and seems to me that the "dial-peer voice 1 pots"
basically tells the router that the phone number of the connected
device on port 1/0/0 has a phone number of whatever is specified by
the destination-pattern....
Kenny
----- Original Message -----
From: Simon Baxter
To: Kenny Sallee ; ccielab@groupstudy.com
Sent: Tuesday, August 22, 2000 10:38 PM
Subject: RE: VoIP config example from Doc CD
I wish I could spot what you think's wring with it!!
ip addresses match, pattern's match...
??
-----Original Message-----
From: Kenny Sallee [mailto:mischa@worldshare.net]
Sent: Wednesday, August 23, 2000 3:14 PM
To: ccielab@groupstudy.com
Subject: VoIP config example from Doc CD
Does anyone else see a problem with this config? It's on the DOC CD
http://127.0.0.1:8080/cc/td/doc/product/software/ios120/12cgcr/voice_c
/vcprt1/vcvoip.htm#xtocid1011341
Configuration for Router SJ
! Configure pots dial peer 1
dial-peer voice 1 pots
destination-pattern +14085554000
port 1/0/0
! Configure voip dial peer 2
dial-peer voice 2 voip
destination-pattern 9...........
session target ipv4:172.16.65.182
! Configure the serial interface
interface serial 0/0
clock rate 2000000
ip address 172.16.1.123
no shutdown
Configuration for Router SLC
! Configure pots dial peer 1
dial-peer voice 1 pots
destination-pattern 9...........
port 1/0/0
! Configure voip dial peer 2
dial-peer voice 2 voip
destination-pattern +14085554000
session target ipv4:172.16.1.123
! Configure serial interface
interface serial 0/0
ip address 172.16.65.182
no shutdown
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:29 GMT-3