From: Kevin Baumgartner (kbaumgar@xxxxxxxxx)
Date: Thu Sep 21 2000 - 01:37:49 GMT-3
Might want to check the archives as I posted a solution for this.
But anyway the problem is that that the cat5k only does aal5snap bridging
mode so the 4500 has to be configured the same.
So use bridge-group on the atm interface and use IRB.
Remove add from atm interface and move to IRB.
bridge irb
bridge 1 route ip
bridge 1 protocol ieee
ip routing
!
interface ATM0.10 point-to-point
bridge-group 1
!
interface BVI 1
ip address 172.16.10.8 255.255.255.0
Kevin
>
> This is a multi-part message in MIME format.
>
> ------=_NextPart_000_0019_01C0235E.3949A6C0
> Content-Type: text/plain;
> charset="iso-8859-1"
> Content-Transfer-Encoding: quoted-printable
>
> help please
> I want to ping to sc0 on cat from 4500 my configs are below for all =
> devices
>
>
> /////////// ////////////// //////////
> 4500 -------------- ls1010 ------------ cat5k
> ////////// ////////////// =
> //////////////
>
>
> 4500 config
>
>
> interface ATM0
> ip address 172.16.10.8 255.255.255.0
> no ip directed-broadcast
> pvc 0/16 ilmi
> !
> pvc 0/5 qsaal
> !
> no atm ilmi-keepalive
> !
> interface ATM0.10 point-to-point
> no ip directed-broadcast
> pvc 4/44=20
> broadcast
> encapsulation aal5snap
> !
>
> ls1010 config
>
> !
> hostname Switch
> !
> !
> !
> atm service-category-limit cbr 64512
> atm service-category-limit vbr-rt 64512
> atm service-category-limit vbr-nrt 64512
> atm service-category-limit abr-ubr 64512
> atm address 47.0091.8100.0000.00d0.baf3.3b01.00d0.baf3.3b01.00
> atm router pnni
> node 1 level 56 lowest
> redistribute atm-static
> !
> !
> interface ATM0/0/0 ****************4500 goes here
> no keepalive
> !
> interface ATM0/0/1 ************atm module on cat goes here
> no keepalive
> atm pvc 3 33 interface ATM0/0/0 4 44=20
> !
> interface ATM0/0/2
> no keepalive
>
> ATM CONFIG
>
>
> version 11.3
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname ATM
> !
> !
> !
> !
> interface Ethernet0
> !
> interface ATM0
> atm pvc 1 3 33 aal5snap
> atm pvc 3 0 16 ilmi
> atm pvc 2 0 5 qsaal
> atm bind pvc vlan 1 10=20
> !
> alias exec t conf t
> !
> line con 0
> line vty 0 4
> no login
> !
> end
>
> I put sc0 in vlan 10 172.16.10.1 and can't ping it from 4500
> the packets are leaving the 4700 but i have no idea what happens after =
> that
> I have a test in san jose on fri and sat any one else
>
> ------=_NextPart_000_0019_01C0235E.3949A6C0
> Content-Type: text/html;
> charset="iso-8859-1"
> Content-Transfer-Encoding: quoted-printable
>
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
> <HTML><HEAD>
> <META content=3D"text/html; charset=3Diso-8859-1" =
> http-equiv=3DContent-Type>
> <META content=3D"MSHTML 5.00.2722.2800" name=3DGENERATOR>
> <STYLE></STYLE>
> </HEAD>
> <BODY bgColor=3D#ffffff>
> <DIV><FONT size=3D2>help please</FONT></DIV>
> <DIV><FONT size=3D2>I want to ping to sc0 on cat from 4500 my =
> configs are=20
> below for all devices</FONT></DIV>
> <DIV> </DIV>
> <DIV> </DIV>
> <DIV><FONT size=3D2>/////////// =20
> =
> =20
> //////////////  =
> ; =20
> //////////</FONT></DIV>
> <DIV><FONT=20
> size=3D2>4500 -------------- &nbs=
> p; ls1010 ------------ cat5k</FONT></DIV>
> <DIV><FONT size=3D2>////////// =20
> =
> =20
> ////////////// =20
> //////////////</FONT></DIV>
> <DIV> </DIV>
> <DIV> </DIV>
> <DIV><FONT size=3D2>4500 config</FONT></DIV>
> <DIV> </DIV>
> <DIV> </DIV>
> <DIV><FONT size=3D2>interface ATM0<BR> ip address 172.16.10.8=20
> 255.255.255.0<BR> no ip directed-broadcast<BR> pvc 0/16=20
> ilmi<BR> !<BR> pvc 0/5 qsaal<BR> !<BR> no atm=20
> ilmi-keepalive<BR>!<BR>interface ATM0.10 point-to-point<BR> no ip=20
> directed-broadcast<BR> pvc 4/44 <BR> broadcast<BR> =20
> encapsulation aal5snap<BR> !</FONT></DIV>
> <DIV> </DIV>
> <DIV><FONT size=3D2>ls1010 config</FONT></DIV>
> <DIV> </DIV>
> <DIV><FONT size=3D2>!<BR>hostname Switch<BR>!<BR>!<BR>!<BR>atm=20
> service-category-limit cbr 64512<BR>atm service-category-limit vbr-rt=20
> 64512<BR>atm service-category-limit vbr-nrt 64512<BR>atm =
> service-category-limit=20
> abr-ubr 64512<BR>atm address=20
> 47.0091.8100.0000.00d0.baf3.3b01.00d0.baf3.3b01.00<BR>atm router=20
> pnni<BR> node 1 level 56 lowest<BR> redistribute=20
> atm-static<BR>!<BR>!<BR>interface ATM0/0/0 =20
> ****************4500 goes here<BR> no keepalive<BR>!<BR>interface=20
> ATM0/0/1 ************atm module on cat goes here<BR> no =
>
> keepalive<BR> atm pvc 3 33 interface ATM0/0/0 4 44=20
> <BR>!<BR>interface ATM0/0/2<BR> no keepalive</FONT></DIV>
> <DIV> </DIV>
> <DIV><FONT size=3D2>ATM CONFIG</FONT></DIV>
> <DIV> </DIV>
> <DIV><FONT size=3D2></FONT> </DIV>
> <DIV><FONT size=3D2>version 11.3<BR>service timestamps debug =
> uptime<BR>service=20
> timestamps log uptime<BR>no service password-encryption<BR>!<BR>hostname =
>
> ATM<BR>!<BR>!<BR>!<BR>!<BR>interface Ethernet0<BR>!<BR>interface=20
> ATM0<BR> atm pvc 1 3 33 aal5snap<BR> atm pvc 3 0 16 =
> ilmi</FONT></DIV>
> <DIV><FONT size=3D2> atm pvc 2 0 5 qsaal<BR> atm bind pvc vlan =
> 1 10=20
> <BR>!<BR>alias exec t conf t<BR>!<BR>line con 0<BR>line vty 0 =
> 4<BR> no=20
> login<BR>!<BR>end</FONT></DIV>
> <DIV> </DIV>
> <DIV><FONT size=3D2>I put sc0 in vlan 10 172.16.10.1 and can't ping =
> it from=20
> 4500</FONT></DIV>
> <DIV><FONT size=3D2> the packets are leaving the 4700 but i have no =
> idea what=20
> happens after that</FONT></DIV>
> <DIV><FONT size=3D2>I have a test in san jose on fri and sat any one=20
> else</FONT></DIV></BODY></HTML>
>
> ------=_NextPart_000_0019_01C0235E.3949A6C0--
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:59 GMT-3