From: Sam Munzani (sam@xxxxxxxxxxx)
Date: Tue Sep 26 2000 - 13:13:37 GMT-3
Add following in that config if you want dynamic routing protocols
working in async.
int async 1
async default routing
Then add that network in your routing protocol. e.g. eigrp 1, network
xxx.xxx.xxx.xxx
Sam
----- Original Message -----
From: James Cochrane
To: 'ccielab@groupstudy.com'
Sent: Tuesday, September 26, 2000 10:31 AM
Subject: RE: AUX to AUX
http://www.cisco.com/warp/public/793/access_dial/auxback.html
James.
-----Original Message-----
From: Tony Olzak [mailto:aolzak@buckeye-express.com]
Sent: 26 September 2000 16:06
To: ccielab@groupstudy.com
Subject: AUX to AUX
Guys,
Anyone have a sample config for an AUX to AUX setup?
Tony
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:03 GMT-3