OSPF and Virtual Links

From: Sanjay Bhakta (sanjaybhakta@xxxxxxxxxxx)
Date: Thu Sep 28 2000 - 17:18:21 GMT-3


   
   Here is the issue:
   
       ------r2--------
       | |
     isdn frame
       | |
       ------r1----------
   
   R1 loopback: 137.20.1.1/24
   R2 loopback: 137.20.2.2/24
   
   R1's ethernet and loopback are in area 0
   R1's serial(frame) is in area 1
   R1's bri(isdn) is in area 2
   
   R2's ethernet and loopback are in area 20
   R2's serial(frame) is in area 1
   R2's bri(isdn) is in area 2 and is the calling router configured as
   ospf demand-circuit.
   
   I have 2 virtual links, one through area 1 and another through area
   2. If I just have one virtual link through area 1, everything works
   just fine. Once I add the second virtual link, both R1 and R2 start
   rebooting one after the other.
   
   Any ideas. I have 11.3(11a) IOS, I am going to try 12.0 IOS to see if
   that makes a differance.
   
   My question is can you have 2 virtual links pointing to the same
   router ID, one from dedicated link and another from demand circuit?
   
   Thanks in advance.
   Sanjay Bhakta (RTP 10/18)
   sbhakta@charter.net
   sanjaybhakta@hotmail.com



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:08 GMT-3