From: Dayong Gan (dgan@xxxxxxxx)
Date: Tue Oct 17 2000 - 15:40:47 GMT-3
hi, group.
I have configured ppp callback using dialer profile. but does not
work. Please help.
isdn-1--------------------------------isdn-2
isdn-1#sh run
Building configuration...
Current configuration:
!
!
hostname isdn-1
!
!
username isdn-2 password 0 cisco
ip subnet-zero
no ip domain-lookup
isdn switch-type basic-ni1
!
!
interface BRI0
no ip address
no ip directed-broadcast
encapsulation ppp
dialer pool-member 2
isdn spid1 613721116100 7211161
isdn spid2 613721116900 7211169
ppp authentication chap
!
interface Dialer2
ip address 15.15.15.1 255.255.255.0
encapsulation ppp
dialer remote-name isdn-2
dialer string 97218835
dialer pool 2
dialer-group 1
ppp callback request
ppp authentication chap
!
!
ip classless
!
access-list 110 deny eigrp any any
access-list 110 permit ip any any
dialer-list 1 protocol ip list 110
!
line con 0
line vty 0
exec-timeout 0 0
password 7 030A4E1D090A2C4F
login
line vty 1 4
password 7 030A4E1D090A2C4F
login
!
end
isdn-1#
isdn-2#sh run
!
hostname isdn-2
!
!
username isdn-1 password 0 cisco
ip subnet-zero
isdn switch-type basic-ni1
!
interface BRI0
no ip address
encapsulation ppp
dialer pool-member 2
no snmp trap link-status
isdn spid1 613721883500 7218835
isdn spid2 613721165900 7211659
ppp authentication chap
!
interface Dialer2
ip address 15.15.15.2 255.255.255.0
encapsulation ppp
dialer remote-name isdn-1
dialer callback-secure
dialer string 97211161 class Back1
dialer pool 2
dialer-group 1
ppp callback accept
ppp authentication chap
!
router eigrp 80
network 7.0.0.0
network 206.116.76.0
no auto-summary
!
router igrp 120
!
ip classless
!
!
map-class dialer Back1
dialer callback-server username
access-list 100 deny eigrp any any
access-list 100 permit ip any any
dialer-list 1 protocol ip list 100
!
isdn-1# ping 15.15.15.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 15.15.15.2, timeout is 2 seconds:
5d04h: BRI0: rotor dialout [priority]
5d04h: BRI0: Dialing cause ip (s=15.15.15.1, d=15.15.15.2)
5d04h: BRI0: Attempting to dial 97218835
5d04h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
5d04h: %DIALER-6-BIND: Interface BRI0:1 bound to profile Dialer2
5d04h: dialer Protocol up for BR0:1.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 40/41/44 ms
isdn-1#
5d04h: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed
state to
up
5d04h: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 97218835
isdn-2
isdn-1#
isdn-1#sh dialer
BRI0 - dialer type = ISDN
Dial String Successes Failures Last called Last status
0 incoming call(s) have been screened.
0 incoming call(s) rejected for callback.
BRI0:1 - dialer type = ISDN
Idle timer (120 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is data link layer up
Dial reason: ip (s=15.15.15.1, d=15.15.15.2)
Interface bound to profile Dialer2
Time until disconnect 109 secs
Current call connected 00:00:13
Connected to 97218835 (isdn-2)
Best regards,
Dayong Gan
Network Engineer
Nuvo Network Management Inc.
260-2650 Queensview Drive, Ottawa. Canada K2B 8H6
Tel:(613)721-6886 ext. 417
Fax:(613)721-1399
Email: dgan@nuvo.com
http://www.nuvo.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:27 GMT-3