From: Justin Menga (Justin.Menga@xxxxxxxxxxxxxxxxxx)
Date: Sun Nov 05 2000 - 17:05:31 GMT-3
You must use SR/TLB on R2 if you want e0 and to0 on R2 to
communicate...........DLSW is not involved in that communication process
Regards,
Justin Menga MCSE+I CCNP CCSE ASE
WAN Specialist
Computerland New Zealand
PO Box 3631, Auckland
DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
mailto: justin.menga@computerland.co.nz
-----Original Message-----
From: Philip Lai [mailto:philip.lai@ncr.com]
Sent: Sunday, 5 November 2000 12:58 a.m.
To: ccielab@groupstudy.com
Cc: philip@home.com.hk
Subject: Simple DLSW question
Hi, all
e0|---R1--s0--s0-R2---|e0
|
to0
I am reading the Neworkers presentation powerpoint and it has a scenario
like this.
If I am going to bridge the interface R1e0, R2 e0 and to0 by using DLSW, is
it necessary to do a translational bridging in R2 ? The example do so. But I
am wondering if I have form a dlsw peer between R1 and R2, I can bridge R1
e0 to R2 to0 and R1 e0 to R2 e0. then R2 to0 and e0 should be able to bridge
each other. Am I right ?
Thanks for any suggestion.
Philip
Only one week to the exam but they did change the scope !!!! Shit !!! What
should I do now ?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:41 GMT-3