From: yujianchun (stiff.yu@xxxxxxxxxxxxxxxxxx)
Date: Sun Nov 05 2000 - 22:13:43 GMT-3
pls try dlsw load-balance round-robin or circuit-robin in higher ios
version.
-----Original Message-----
From: Jansen <jysh@teamsun.com.cn>
To: ccielab <ccielab@groupstudy.com>
Date: 03 November 2000 23:55
>Hi,all
>
> can anybody explain this for me?
>
>i configure dlsw like this to provide loadbalance(ios 11.2.15):
>
>dlsw local-peer peer-id 192.169.1.1
>dlsw remote-peer 0 tcp 192.169.1.2
>dlsw remote-peer 0 tcp 192.169.1.3
>dlsw duplicate-path-bias load-balance
>dlsw timer explorer-wait-time 30
>dlsw bridge-group 1
>
>r1#sh dlsw reach
>....
>
>DLSw Remote NetBIOS Name reachability cache list
>NetBIOS Name status Loc. peer
>ADC-GP FOUND REMOTE 192.169.1.2(2065) max-lf(1500)
> 192.169.1.3(2065) max-lf(1500)
>CHENM FOUND REMOTE 192.169.1.2(2065)
> 192.169.1.3(2065)
>KATHY FOUND REMOTE 192.169.1.2(2065)
> 192.169.1.3(2065)
>PC-SERVER FOUND REMOTE 192.169.1.2(2065) max-lf(17800)
> 192.169.1.3(2065)
>SFH FOUND REMOTE 192.169.1.2(2065)
> 192.169.1.3(2065)
>TEAMSUN09 FOUND REMOTE 192.169.1.2(2065)
> 192.169.1.3(2065)
>
>but circuit is always established on 192.169.1.2 which looks like:
>
>r1#sh dlsw cir det
>Index local addr(lsap) remote addr(dsap) state
>3204448310 0003.3001.18cf(F0) 1000.040d.f5f1(F0) CONNECTED
> PCEP: 15B854 UCEP: 153D90
> Port:TB1 peer 192.169.1.2(2065)
> Flow-Control-Tx CW:20, Permitted:25; Rx CW:20, Granted:25; Op:
Repeat
> Congestion: Low(02), Flow Op: Half: 0/0 Reset 0/0
> RIF = --no rif--
>1325400116 0003.3001.18cf(F0) 0005.93c1.44b4(F0) CONNECTED
> PCEP: 6B520 UCEP: 139B9C
> Port:TB1 peer 192.169.1.2(2065)
> Flow-Control-Tx CW:20, Permitted:30; Rx CW:20, Granted:27; Op:
Repeat
> Congestion: Low(02), Flow Op: Half: 0/0 Reset 0/0
> RIF = --no rif--
>
>is there anything wrong in the configuration?
>or the balance is not based on circuit?
>
> Jansen
> 00-11-3
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:42 GMT-3