From: Ramil (ramil@xxxxxxxxxxx)
Date: Tue Nov 07 2000 - 21:35:49 GMT-3
Looking for swap in early Feb, late Jan.
----- Original Message -----
From: "Tony Olzak" <aolzak@buckeye-express.com>
To: "Dave McFetridge" <dmcfetridge@eccinc.com>
Cc: <ccielab@groupstudy.com>
Sent: Tuesday, November 07, 2000 6:14 PM
Subject: Re: OSPF advertisement question....
> Dave,
>
> What exactly are you trying to accomplish in this scenario? Is it to
> actually see /32 routes or to route across a frame with no maps, and
without
> using point-to-multipoint?
>
> If it's the second scenario, just use policy routing to specify the next
hop
> for your networks. If it's the first goal, I don't know if there's a way
> without using point-to-multipoint.
>
> Tony
>
> ----- Original Message -----
> From: "Dave McFetridge" <dmcfetridge@eccinc.com>
> To: <ccielab@groupstudy.com>
> Sent: Tuesday, November 07, 2000 3:31 PM
> Subject: OSPF advertisement question....
>
>
> > When using OSPF non-broadcast network types, host routes are suppressed
> for
> > that link. Is there a way to generate them? I tried to redistribute
> > connected with a route-map matching the S0 ip address and then adding a
> > summary statement in OSPF. I also tried an area 0 range statement with
no
> > luck. I realize a summary statement is a way to advertise many as one,
but
> > there must be a way to advertise a route as a smaller or more specific
> one,
> > I just can't seem it stumble across the right combination.
> > Thanks in advance.....5 days and counting....
> >
> > Dave McFetridge
> > Network Consultant
> > EPLUS Technology of PA
> > www.ePLUS.com
> > (610) 495-7800 x252
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:43 GMT-3