From: Roger, Michael (Michael.Roger@xxxxxxxxxxxxx)
Date: Wed Nov 08 2000 - 14:52:38 GMT-3
Great if he had a 800 router, go try on the 2500.
-----Original Message-----
From: Russell Lusignan [mailto:rlusignan@boaw.net]
Sent: Wednesday, November 08, 2000 11:00 AM
To: 'Roger, Michael'; 'Ron Z.'; ccielab@groupstudy.com
Subject: RE: help_upgrade IOS via aux or con
Actually you can upgrade the flash via the console or aux:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/800/800swcfg/
upg_ios.htm
<http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/800/800swcfg
/upg_ios.htm>
Russell Lusignan
Senior Network Engineer
Bird On A Wire Networks
(905) 896-6267
rlusignan@boaw.net
-----Original Message-----
From: Roger, Michael [ mailto:Michael.Roger@getronics.com
<mailto:Michael.Roger@getronics.com> ]
Sent: Wednesday, November 08, 2000 10:07 AM
To: 'Ron Z.'; ccielab@groupstudy.com
Subject: RE: help_upgrade IOS via aux or con
You have to use the token ring or the serial line to upgrade the flash, you
cannot do it over the console or aux. If you have another router with an
ethernet port, just use that then swap the flash simms, If you don't have
another token ring for your tftp server.
-----Original Message-----
From: Ron Z. [ mailto:ron@xtranetsolutions.com <mailto:ron@xtranetsolutions.
com> ]
Sent: Wednesday, November 08, 2000 8:26 AM
To: ccielab@groupstudy.com
Subject: help_upgrade IOS via aux or con
Hey, All,
I have a Cisco 2504 (1 token, 2 serial, 16MB flash/16MB DRAM) with IOS 11.3.
I'd like to upgrade it to 12.1 with IP sec. I downloaded the IOS image
(c2500-jos56i-l_121-5.bin) and tried to upgrade it using the serial port and
type "copy tftp flash". It does't work.
I checked the config guide. It just mentioned "copy xmodem flash" for Cisco
1600 or 3600 seris using aux or con port. Is there any way to upgrade the
IOS using Con or Aux port for 2500 series?
Thanks in advance,
Ron
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:43 GMT-3