From: Simon Baxter (Simon.Baxter@xxxxxxxxxxxxxx)
Date: Thu Nov 09 2000 - 03:11:43 GMT-3
Hello all.
I'm trying to autodiscover a network on the other side of an atm link.
Basically, I configure the A end like this :
interface ATM1/0
ip add 192.168.1.1 255.255.255.0
atm arp-server self
no ip route-cache
no ip mroute-cache
atm pvc 1 0 5 qsaal
atm pvc 2 0 16 ilmi
atm esi-address 700070007000.01
map-group apple
appletalk cable-range 100-100 100.1
appletalk zone atm
!
map-list apple
appletalk 100.2 atm-nsap 47.00918100000000107BD3E501.720072007200.01
broadcast
and try to work out, from the B end, what the network and zones are.
with
!B
int atm 1/0
apple cable-range 222-222 222.22
appletalk discovery
I can get the correct cable network range replaced on B, but unless I know
the correct "host" part of the apple address mapped on A, I'll never get the
ZIP reply as there's no corresponding map to B...
confused?
I guess my question is, is there a way to use "inarp" on ATM SVCs??
thanks.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:43 GMT-3