From: Justin Menga (Justin.Menga@xxxxxxxxxxxxxxxxxx)
Date: Thu Nov 09 2000 - 23:52:25 GMT-3
That's all..........
Regards,
Justin Menga MCSE+I CCNP CCSE ASE
WAN Specialist
Computerland New Zealand
PO Box 3631, Auckland
DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
mailto: justin.menga@computerland.co.nz
-----Original Message-----
From: Tony Olzak [mailto:aolzak@buckeye-express.com]
Sent: Friday, 10 November 2000 12:59 p.m.
To: ccielab@groupstudy.com
Subject: DLSW Help
How would I configure a filter to only allow NetBIOS traffic across
DLSw on Dopey? Is it just:
access-list 200 permit 0xF0F0 0x0101
Or is there something else I need to allow for NetBIOS?
Configs:
Dopey
!
source-bridge ring-group 200
dlsw local-peer peer-id 15.0.0.1
dlsw remote-peer 0 tcp 16.0.0.1 lsap-output-list 200 lf 1500
dlsw remote-peer 0 tcp 17.0.0.1 lsap-output-list 200
!
interface loopback 0
ip address 15.0.0.1 255.0.0.0
!
int tokenring 0
ip address 192.168.1.1 255.255.255.0
source-bridge 1 1 200
source-bridge spanning
!
access-list 200 permit 0xF0F0 0x0101
Sleepy
!
dlsw local-peer peer-id 16.0.0.1
dlsw remote-peer 0 tcp 15.0.0.1
dlsw remote-peer 0 tcp 17.0.0.1
dlsw bridge-group 1
!
interface loopback 0
ip address 16.0.0.1 255.0.0.0
!
interface ethernet 0
ip address 192.168.2.1 255.255.255.0
bridge-group 1
!
bridge 1 protocol ieee
Sneezy
!
source-bridge ring-group 200
dlsw local-peer peer-id 17.0.0.1
dlsw remote-peer 0 tcp 15.0.0.1
dlsw remote-peer 0 tcp 16.0.0.1 lf 1500
dlsw icanreach mac-exclusive
dlsw icanreach mac-address 4000.3725.0101 mask 0000.0000.0000
!
interface loopback 0
ip address 17.0.0.1 255.0.0.0
!
interface tokenring 0
ip address 192.168.3.1 25.255.255.0
source-bridge 2 1 200
source-bridge spanning
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:44 GMT-3