Appletalk - AURP

From: Ronnie Royston (RonnieR@xxxxxxxxxxxxxxxxx)
Date: Tue Nov 14 2000 - 14:17:31 GMT-3

• Next message: tom cheung: "RE: dialer watch question"
• Previous message: Piperw222@xxxxxxx: "CCIE BOOTCAMP - LAB 2 - route map problem"
• Next in thread: Ronnie Royston: "RE: Appletalk - AURP"
• Maybe reply: Ronnie Royston: "RE: Appletalk - AURP"
• Maybe reply: Erick B.: "Re: Appletalk - AURP"
• Maybe reply: Ronnie Royston: "RE: Appletalk - AURP"
• Maybe reply: Eric Fairfield: "Re: Appletalk - AURP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
I got a gre tunnel up with no problems. Tore it down and tried AURP mode.
The AURP tunnel is not working. I have tried pointing the tunnel
destination to both the far-end ip interface address and the far-end tunnel
ip address. I have apple route redist enabled on both routers on the
tunnel. Does anyone have a working config for aurp, or advice? Thanks
alot.

• Next message: tom cheung: "RE: dialer watch question"
• Previous message: Piperw222@xxxxxxx: "CCIE BOOTCAMP - LAB 2 - route map problem"
• Next in thread: Ronnie Royston: "RE: Appletalk - AURP"
• Maybe reply: Ronnie Royston: "RE: Appletalk - AURP"
• Maybe reply: Erick B.: "Re: Appletalk - AURP"
• Maybe reply: Ronnie Royston: "RE: Appletalk - AURP"
• Maybe reply: Eric Fairfield: "Re: Appletalk - AURP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:44 GMT-3