From: Hazel Gachoka (hgachoka@xxxxxxxxx)
Date: Tue Nov 14 2000 - 17:30:53 GMT-3
I tested it a while back and it only worked for DV protocols and NOT OSPF!!!
Hazel
At 11:19 AM 11/14/00 -0600, tom cheung wrote:
>I don't have an ISDN simulator. Can someone try this out on his/her lab and
>see if this feature works for OSPF? Thanks very much.
>
>
>>From: "Steve McNutt" <lpd@jacksonville.net>
>>Reply-To: "Steve McNutt" <lpd@jacksonville.net>
>>To: "tom cheung" <tkc9789@hotmail.com>, <ccielab@groupstudy.com>
>>Subject: RE: dialer watch question
>>Date: Tue, 14 Nov 2000 10:54:18 -0500
>>
>>Jah, I was looking into that the other day myself. The impression I got
>>was
>>that eventually they intend for it to be routing protocol indepenent, but
>>at
>>this time on EIGRP and IGRP are supported.
>>
>>-----Original Message-----
>>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>>tom cheung
>>Sent: Tuesday, November 14, 2000 10:27 AM
>>To: ccielab@groupstudy.com
>>Subject: dialer watch question
>>
>>
>>I'm confused as to when dialer watch can be used. In the doc CD
>>http://127.0.0.1:8080/cc/td/doc/product/software/ios120/12cgcr/dial_c/dcdbak
>>dw.htm,
>> it states that this feature is routing protocol independent. IGRP, EIGRP
>>or OSPF can be used. But I seem to remember reading somewhere else that
>>dialer watch is only supported on DV protocols. So which is correct? Your
>>input will be appreciated.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:45 GMT-3