From: Jennifer Joy (jjoy@xxxxxxxxxxx)
Date: Wed Nov 15 2000 - 00:15:47 GMT-3
I know this has been asked a thousand times. But, it seems to
me in all the cases I found it was OSPF bringing the line up not
a 255.255.255.255 broadcast. (Yes, I tried to look in the archives.)
Please help. For my second attempt I've been studying every
night and I think my brain is beginning to fail.
Why am I getting this?
2d02h: Dialer0 DDR: ip (s=137.20.224.5, d=255.255.255.255), 102 bytes, outgoing
interesting (ip PERMIT)
Here is my config. I'm also not doing it by the book. I figured
all that needed to be redistributed from IGRP into OSPF was the
137.20.40.0 network. So I did it that way.
config below:
<snip>
interface BRI0
no ip address
no ip directed-broadcast
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-ni
isdn spid1 314360415101 3604151
no cdp enable
!
interface Dialer0
ip address 137.20.224.5 255.255.240.0
no ip directed-broadcast
encapsulation ppp
ip ospf demand-circuit
dialer remote-name r6
dialer string 3604152
dialer pool 1
dialer-group 1
no cdp enable
!
!
router ospf 7
redistribute igrp 7 metric 100 metric-type 1 subnets route-map FOO
network 137.20.25.2 0.0.0.0 area 2
network 137.20.64.0 0.0.15.255 area 0
network 137.20.100.32 0.0.0.31 area 1
network 137.20.224.5 0.0.0.0 area 0
network 137.20.240.1 0.0.0.0 area 0
area 1 virtual-link 137.20.33.33
area 1 virtual-link 200.200.100.1
!
!
router igrp 7
redistribute ospf 7 metric 10000 1000 255 1 1500
passive-interface BRI0
passive-interface Ethernet0
passive-interface Serial0.1
passive-interface Serial1
network 137.20.0.0
!
ip classless
!
!
map-class frame-relay FOO
access-list 5 permit 137.20.40.0 0.0.0.255
access-list 6 permit any
dialer-list 1 protocol ip permit
route-map FOO permit 10
match ip address 5
!
route-map FOO deny 20
match ip address 6
!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:45 GMT-3