From: Rick Crowson (rick_crowson@xxxxxxxxxxx)
Date: Thu Nov 16 2000 - 04:16:09 GMT-3
Rob,
I would try setting the peer to a "crypto" peer, like your tunnel
interface or your FE. The loopback interfaces do not have a crypto map
assigned.
Rick
>From: "Rob Barton" <robbarto@cisco.com>
>Reply-To: "Rob Barton" <robbarto@cisco.com>
>To: "Ccielab" <ccielab@groupstudy.com>
>CC: <lpd@jacksonville.net>, <Simon.Baxter@au.logical.com>
>Subject: IPsec over GRE
>Date: Wed, 15 Nov 2000 16:37:40 -0800
>
>Here is the config I am currently using, but i still can't ping to the IP
>address of the other side of the GRE tunnle. I am getting this weird error
>message:
>
>02:31:41: %CRYPTO-6-IKMP_MODE_FAILURE: Processing of Quick mode failed with
>peer
> at 100.1.1.1
>
>R1 and R2 are directly connected through a x-over cable on FastEthernet
>
>Any ideas?
>
>Thanks - Rob.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:45 GMT-3