From: zhangxianqi (zhangxqi@xxxxxxxxxxx)
Date: Thu Nov 16 2000 - 05:44:59 GMT-3
hi all
I get a oddness question about irb with appletalk,can anyboby solve
it,thanks in advance!
--------------(e0)r1(bvi1)------------------------------(bvi1)r2(e0)--
--
cable 1-1 1.1 cable 2-2 2.1 2.2
cable 3-3 3.1
zone z1 zone z2
zone z3
r1:
bridge 1 protocol ieee
birdge irb
bridge 1 route app
bridge 1 bridge app
int bvi 1
app cable 2-2 2.1
app zone z2
int s 0
bridge-group 1
int e 0
app cable 1-1 1.1
app zone z1
r2:
bridge 1 protocol ieee
birdge irb
bridge 1 route app
bridge 1 bridge app
int bvi 1
app cable 2-2 2.1
app zone z2
int s 0
bridge-group 1
int e 0
app cable 3-3 3.1
app zone z3
-----------------------------------
r2#sh app rou
Codes: R - RTMP derived, E - EIGRP derived, C - connected, A - AURP
S - static P - proxy
3 routes in internet
The first zone listed for each entry is its default (primary) zone.
R Net 1-1 [1/G] via 2.1, 0 sec, BVI1, no zone set
C Net 2-2 directly connected, BVI1, zone z2
C Net 3-3 directly connected, Ethernet0, zone z3
you can see r2 can't get the zone of 1-1
--------------------------------
r2#ping 1.1
Type escape sequence to abort.
Sending 5, 100-byte AppleTalk Echos to 1.1, timeout is 2 seconds:
EEEEE
Success rate is 0 percent (0/5)
why!!!!!!!!!
xianqi
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:45 GMT-3