From: Shaun Nicholson (Shaun.Nicholson@xxxxxx)
Date: Thu Nov 16 2000 - 10:45:06 GMT-3
This is only supported on Version 12.1 (I think) I thought the lab covered up t
o and including 12.0. If thats the case why are we looking at 12.1 code??
Now to do DHCP under 11.2 or 12.0 would you need to use NAT and a local IP pool
solution ???????
Not trying to be negative only trying to save people some time as theres a lot
to learn and not a lot of time to do it in (3 weeks and counting).
So my take is if you have to do DHCP on the lab then you would have to use a lo
cal IP pool. Anyone want to clear this up as I havent started to look at DHCP s
olutions yet I was hoping to use the CD if such a question came up once I have
read up on how to do it and perhaps built the config a couple of times in the l
ab.
I've been wrong before and I'm sure I'll be wrong again so please dont flame.
Shaun
bertke@charter.net on 11/16/2000 02:06:00 AM
To: dwsmall@fatkid.com@Internet
cc: ccielab@groupstudy.com@Internet (bcc: Shaun Nicholson/MD/KAIPERM)
Subject: Re: DHCP addressing for LAN interfaces
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/
121t2/dt_dhcpc.htm#xtocid237971
Watch the word wrap!
-- Bert (RTP on 11/29)"Derek Small (Fuse)" wrote: > > I saw someone post a remark some time ago about 12.1 supporting DHCP address > assignment on LAN interfaces. I have a 2621 with IP plus, but cannot find > any such capability. Does anyone know if this ability exists in 12.1 or > not. I'm looking for a command similar to the "ip address negotiated" > command for WAN interfaces. > > Derek Small > CCIE #5832, CVoice, Nortel NCSE > 513-703-7059 > dwsmall@fatkid.com >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:45 GMT-3