From: Sorin Suru (sorin3177@xxxxxxxxxxx)
Date: Sun Jan 14 2001 - 16:32:46 GMT-3
All,
I've been trying to resolve this issue for the last 2 days, any help is
appreciated. Here is the scenario:
R5 is redistributing only oNE Ospf route into iGRP to R4, therefore from R4
Im able to ping only one IP(200.200.100.1-R2)..
R5
!
router ospf 1
area 1 virtual-link 137.20.33.33
area 1 virtual-link 200.200.100.1
redistribute igrp 1 metric 100 metric-type 1 subnets route-map filter_igrp
network 137.20.25.2 0.0.0.0 area 2
network 137.20.25.0 0.0.0.255 area 2
network 137.20.64.0 0.0.15.255 area 0
network 137.20.100.32 0.0.0.31 area 1
network 137.20.224.5 0.0.0.0 area 0
network 137.20.240.1 0.0.0.0 area 0
!
router igrp 1
redistribute ospf 1 metric 2000 100 255 1 1500
passive-interface BRI0
passive-interface Ethernet0
passive-interface Serial0.1
passive-interface Serial0.3
passive-interface Serial1
network 137.20.0.0
sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate
default
U - per-user static route, o - ODR
Gateway of last resort is not set
137.20.0.0/16 is variably subnetted, 8 subnets, 5 masks
C 137.20.200.16/28 is directly connected, Serial0.2
C 137.20.240.0/20 is directly connected, Loopback0
O IA 137.20.20.0/24 [110/74] via 137.20.100.33, 00:48:00, Serial0.1
I 137.20.40.16/28 [100/8576] via 137.20.200.18, 00:00:08, Serial0.2
O 137.20.100.33/32 [110/64] via 137.20.100.33, 01:02:46, Serial0.1
C 137.20.100.32/27 is directly connected, Serial0.1
O 137.20.100.35/32 [110/64] via 137.20.100.35, 01:02:46, Serial0.1
C 137.20.64.0/20 is directly connected, Ethernet0
200.200.100.0/32 is subnetted, 1 subnets
O 200.200.100.1 [110/65] via 137.20.100.33, 01:02:46, Serial0.1
debug ip igrp on R5
IGRP: sending update to 255.255.255.255 via Serial0.2 (137.20.200.17)
18:03:00: subnet 137.20.200.16, metric=8476
18:03:00: subnet 137.20.40.16, metric=8576
18:03:01: network 200.200.100.0, metric=5100
18:03:01: IGRP: Update contains 2 interior, 1 system, and 0 exterior routes.
18:03:01: IGRP: Total routes in update: 3
IGRP: received update from 137.20.200.18 on Serial0.2
18:03:23: subnet 137.20.40.16, metric 8576 (neighbor 1100)
18:03:23: IGRP: Update contains 1 interior, 0 system, and 0 exterior routes.
18:03:23: IGRP: Total routes in update: 1
R4
!
router igrp 1
network 137.20.0.0
sh ip route
sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate
default
U - per-user static route, o - ODR
Gateway of last resort is not set
137.20.0.0/28 is subnetted, 2 subnets
C 137.20.200.16 is directly connected, Serial0
C 137.20.40.16 is directly connected, Ethernet0
2.0.0.0/24 is subnetted, 1 subnets
C 2.2.2.0 is directly connected, Loopback0
I 200.200.100.0/24 [100/7100] via 137.20.200.17, 00:00:00, Serial0
the frame relay/split horizon are working, any ideas?
Thank you
Sorin
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:29 GMT-3