From: Lev Terebizh (lter@xxxxxxxxxxxxxxxx)
Date: Thu Jan 25 2001 - 15:15:55 GMT-3
This is my cable pinout....
It work...
DB9 RJ-45
1 ----------- 5
5 ----------- 6
6 ----------- 4
9 ----------- 3
=20
----- Original Message -----=20
From: "Tomohiro Yoshizawa" <yoshizawa_t@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, January 25, 2001 7:47 AM
Subject: How to connect token ring???
> Thanks for replying me about the 4-wire 56k/64k
> dsu/csu. Now I know I can use roll over cable even
> though its polar signal is wrong.
>=20
> I have one more question. I have two routers and each
> has token ring connector (9-pin female). I know I
> can't connect those token ring connector directly eath
> other, but I need MAU to connect them. But I don't
> know what kind of cable do I need to connect between
> the router and MAU. I already bought one IBM MAU at
> ebay, but the connectors on that MAU is not RJ45, not
> DB9, not DB15, not DB25. I have never seen such
> connector. Do you have any idea about such MAU?
> Please give me some advice. Thanks!
>=20
> Tomo
>=20
>=20
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:43 GMT-3