From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Tue Feb 06 2001 - 11:03:56 GMT-3
Yeah, I tried that yesterday but it still didn't work. But ipxwan did
work fine with ipx eigrp if you don't use ipxwan unnumbered, specify a
network in the command (different than using "ipx network abc").
B.
On Tue, 6 Feb 2001, Bernard Dunn wrote:
> Although there is a groovy way of doing IPX eigrp:
>
> 3640-2-8(config)#ipx router eigrp 1
> 3640-2-8(config-ipx-router)#network ?
> <1-FFFFFFFE> IPX Network number
> all All IPX networks <<<<-----
>
> Been there since IOS 10.0.
>
> But still, don't believe IPX EIGRP and IPXWAN mixes well.
>
> Regards
>
> Bernard.
>
>
> On Mon, 5 Feb 2001, Chuck Church wrote:
>
> > I had no luck either. Until you define an external net number, the IPXWAN
> > int won't show up as an IPX interface - 'sh ipx int'. I'm guessing that
> > EIGRP won't send hellos over it, as you can't really enter a network number
> > into the ipx router eigrp # config if a network number doesn't exist for
> > that interface. NLSP gets around this by having the network statements on
> > the interfaces themselves, rather than router config.
> >
> > Chuck Church
> > CCNP, CCDP, MCNE, MCSE
> > Sr. Network Engineer
> > Magnacom Technologies
> > 140 N. Rt. 303
> > Valley Cottage, NY 10989
> > 845-267-4000 x218
> >
> >
> >
> > -----Original Message-----
> > From: Brian Hescock [mailto:bhescock@cisco.com]
> > Sent: Monday, February 05, 2001 10:01 PM
> > To: ccielab@groupstudy.com
> > Subject: anyone get ipx eigrp neighbors up over ipxwan unnumbered?
> >
> >
> > Have any of you been able to get ipx eigrp neighors to form over an ipxwan
> > unnumbered interface? Very little info on it but I'm assume it won't work
> > since ipxwan unnumbered doesn't reference an interface with a valid ipx
> > network like regular ip unnumbered does. Couldn't get any ipx eigrp
> > neighbors to form until I added a network number within ipxwan command on
> > both sides of the link. Unnumbered works fine with nlsp but thought I
> > would play with ipx eigrp as well. Would be interested in hearing if one
> > of you got it to work.
> >
> > B.
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:38 GMT-3