From: Earl Aboytes (Earl@xxxxxxxxxxxxxx)
Date: Wed Feb 07 2001 - 02:25:57 GMT-3
When configuring the CSS11000 switches it is important to remember the order
of configuration
Interface
Circuit
Service
Owner
Content
********Interface*******
interface ethernet-1
bridge vlan 3
*********Circuit**********
circuit VLAN3
ip address 10.0.0.1 255.255.255.252
*******Service*********
service S1
ip address 192.168.1.200
active
service S2
ip address 192.168.1.201
*********owner and content********
owner groupstudy.com
content L4_Basic
port 80
protocol tcp
vip address 192.168.1.100
add service S1
add service S2
active
Earl Aboytes, CCIE 6097
-----Original Message-----
From: andrew.2.shore@bt.com
To: wiwanczyk@tec-adv.com; ccielab@groupstudy.com
Sent: 2/6/2001 6:10 AM
Subject: RE: CSS11000 configuration ....
check ciscos web site there is tonnes
Andrew Shore
BTcd
Information Systems Engineering
Internet & Multimedia
-----Original Message-----
From: Wojtek Iwanczyk [mailto:wiwanczyk@tec-adv.com]
Sent: 06 February 2001 13:56
To: ccielab@groupstudy.com
Subject: CSS11000 configuration ....
I know this is off topic, but im going to ask anyway, :o)
I am looking for sample configs for Cisco's (Arrowpoint) Content
switches.
ANYTHING would be greatly appreciated ..
Thanx ..
Wojtek
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:40 GMT-3