From: Chuck Larrieu (chuck@xxxxxxxxxxxxx)
Date: Sat Feb 10 2001 - 17:06:28 GMT-3
R7 is the frame switch.
One of the things you need to do in all bootcamp labs ( if you are renting
rack time ) is configure the frame switch as well as routers.
If you are using your own equipment, or some other rack, you must revise the
bootcamp setups to reflect your connections.
HTH
Chuck
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of ccie
sin
Sent: Saturday, February 10, 2001 11:57 AM
To: ccielab@groupstudy.com
Subject: ccboot camp 1
Hi ,
I was doing lab1 and was in some how confused.
Looking at the actual lab setup , R3 serial 0 is
connected to R4 serial 1.
And R3 serial 1 is connected to R7 serial 3.
But looking at the lab diagram of lab 1 , the R3
serial 0 was show to connect to the frame switch. and
vice vesa.
Which one should we follow ? I know we should change
the router number and interfase to our discretion but
, it's doesn't seem to work.
ANy light someone ???
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:44 GMT-3