From: Bruce Williams (bruce@xxxxxxxxxxxxxxxxxxxxxx)
Date: Sat Feb 10 2001 - 23:26:23 GMT-3
The frame-relay map statements that they use are only from each individual
spoke to the hub. That establishes spoke to hub connectivity, but not spoke
to spoke connectivity. You have to use a route-map for that instead of a
frame-relay map statement.
You could also have use inverse-arp for the hub to spoke connectivity
instead of the map statement, but I assume they want you to become familiar
with map statements.
I also assume that the LMI type of ansi is just to use something other than
the default for the sake of practice.
Bruce Williams
-----Original Message-----
From: Steven Weber [mailto:itweber@netzero.net]
Sent: Saturday, February 10, 2001 8:41 PM
To: ccielab@groupstudy.com
Subject: ccbootcamp lab#1...
I was looking through the answers to lab#1 and I noticed a few things:
(1) the spoke routers have frame-relay map statements on them. Isn't the
point not to have frame relay map statements on the spoke routers. (2)
that they used the poll-interval and hello interval commands. Are those
commands necessary in order to get the lab to work, if so why? (3) the
lmi-type is ansi and not cisco is it necessary to change it or can it be
left at its default.
Can someone please shed some light?
Thanks,
Steve
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:44 GMT-3