From: Jim\(thrupoint\) (jgrina@xxxxxxxxxxxxx)
Date: Mon Feb 12 2001 - 13:57:35 GMT-3
Sanjay,
I did this with a phone in my house, connected via 1750 through ISDN to a
2600 in the office. In the office, I used an FXO port to connect to the PBX.
When the phone in my house went off-hook, I got a dial tone from the PBX in
the office. When the PBX rang that extension, it rang at my house.
Basically, it made my house phone an extension of the PBX.
The function is PLAR, Private Line Auto Ringdown. There is an example in the
VoIP cookbook on CCO.
It works great, the PBX had that extension mapped to my office number, and
both phones rang.
Regards,
Jim
----- Original Message -----
From: "sanjay" <ccienxtyear@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Monday, February 12, 2001 10:24 AM
Subject: VOIP
> Is it possible to set up VOIP so when you pick up a phone (that is =
> connected to the FXS port on the router), it automatically dials out to =
> a certain number. Anyone with configs or commands for this =
> functionality.??
>
> thanks,
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:46 GMT-3