From: Derek Buelna (dameon@xxxxxxxxxxx)
Date: Thu Feb 15 2001 - 07:37:06 GMT-3
Hi,
I was thinking that if I was asked to configure this I'd probably do it
one way but they would have wanted it the other way.
In lab 18 I believe it says to limit broadcasts on a port, on the
catalyst, to 3Mb/s.
Ok, so I read that the percentage of bandwidth method is more accurate
and also hardware based but the answer uses the per packet method.
I'm taking it that 3,000,000 bits/s / 8 = 375,000 bytes/s. I'm
assuming that an average packet size of 1024 would make for an average
throughput of 366.21 of these kinds of packets/s.
Am I understanding this correctly?
Wouldn't it be easier to just say 30%, since it's a 10,000,000 bits/s
link?
set port broadcast 2/9 367
set port broadcast 2/9 30%
Thanks,
-Derek
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:49 GMT-3