From: Kelley, Richard A. (AIT) (rk1813@xxxxxxx)
Date: Fri Feb 16 2001 - 01:42:32 GMT-3
Got to have a 100 Mbps interface to do ISL. The 2610 is 10 Mbps only.
Alan
-----Original Message-----
From: Roger, Michael [mailto:Michael.Roger@getronics.com]
Sent: Thursday, February 15, 2001 1:07 PM
To: 'Steve Clubb'; Ccielab@Groupstudy. Com
Subject: RE: Is ISL on 2610 possible?
need a minimum 2620. No matter which feature set you have.
-----Original Message-----
From: Steve Clubb [mailto:sclubb@cattech.com]
Sent: Thursday, February 15, 2001 11:53 AM
To: Ccielab@Groupstudy. Com
Subject: RE: Is ISL on 2610 possible?
Do you have ip plus?
-----Original Message-----
From: Tariq Sharif [mailto:tariq_sharif@btinternet.com]
Sent: Thursday, February 15, 2001 9:51 AM
To: Ccielab@Groupstudy. Com
Subject: Is ISL on 2610 possible?
Has anyone got ISL on 2610 working? Fastether NM is recognized & commands
(int f1/0.1, encap isl 1 etc) accepted but can't do router on a stick VLAN
interrouting.
Have got the same card working in 3620 (same configs). Just curious if poss
on 2610. Cisco web says can't, but commands are picked up....
Many thanks & regards.
Tariq Sharif
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:50 GMT-3