From: David Anderson (dma@xxxxxxxxx)
Date: Fri Feb 16 2001 - 13:48:01 GMT-3
Michael,
Did you perform this command from global config mode? (config)#
If you type this it should show up at the top portion of your running
configuration with either show run or write terminal....these commands
provide the same output.
Hope that helps.
David
At 09:51 AM 2/16/2001 -0600, Ronnie Royston wrote:
>yea,it is my understanding that they are the same. However, I thought it
>might be worth a try.
>
>-----Original Message-----
>From: David Ankers [mailto:d.ankers@chello.nl]
>Sent: Friday, February 16, 2001 8:30 AM
>To: Ronnie Royston; 'michheal david'; ccielab@groupstudy.com
>Subject: Re: "en pass cisco "
>
>
>Ronnie,
>
>I though sh running was just an internal IOS alias for wri term? Can someone
>
>explain the difference? When I read the orginal post I thought it must be
>either user error or a bug, what will wri term show you that sh runn won't?
>
>D,
>
>
>On Friday 16 February 2001 15:14, Ronnie Royston wrote:
> > Try "wr terminal" instead of "sho run" to look at config.
> >
> > -----Original Message-----
> > From: michheal david [mailto:michael302au@yahoo.com.au]
> > Sent: Thursday, February 15, 2001 5:36 PM
> > To: ccielab@groupstudy.com
> > Subject: "en pass cisco "
> >
> >
> > hi, all :
> >
> >
> > Under my home lab eviroment,when i type "EN PASSWORD
> > CISCO" command, i didn't find the statment in my
> > running config.I am so puzzle.
> >
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:51 GMT-3