From: BUI, TIN T (SBCSI) (tb4565@xxxxxxx)
Date: Fri Feb 16 2001 - 20:53:59 GMT-3
Hi, can any see what the problem is? R5 is a hub and R2 & R3 are spokes for
Frame-relay. I have set ip ospf hello timer on all 3 routers to 50 seconds
and set all interfaces to ip ospf network type non-broadcast. R5 has one
subinterface that points to both R2 and R3. R2 & R3 are physical
interfaces. R2 is not showing ospf neighbors correctly but yet interesting
thing is that all routes show up on all routers including R2. On R2 and R3,
I used the command "ip ospf neighbor R5 priority 10" under ospf process on
both R2 & R3. On R5, I use ip ospf priority 10 on R5 subinterface. Am I
missing something? I have checked all hello, dead timers on all routers to
make sure they are equal. I have also verified all rid are set correctly.
>From R2 the show ip ospf neighbor sees the following:
* r3 full/bdr and R5 attempt/drother
>From R3 the show ip ospf neighbor sees the following:
* r2 full/dr and R5 full/dr
>From R5 the show ip ospf neighbor sees the following:
* r3 full/bdr
> Tin T. Bui
> Senior Network Manager
> CCNP, CNE, MCP
> Network Management Center
> SBC Services Inc.
> 7337 Trade Street, Rm 1110
> San Diego, Ca 92121
> Office #: 858-886-4644/858-886-4589
> Pager #: 858-494-0482
> Fax #: 858-549-4103
> Email: tb4565@sbc.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:51 GMT-3