From: Andrew Short (ashort@xxxxxxxxxxxxxxx)
Date: Mon Feb 19 2001 - 13:00:40 GMT-3
I don't think this can be done without breaking the NDA.
Actually, I think it CAN be answered properly: In the lab, you ALWAYS get
enough information to accomplish your task correctly; it may NOT be all
the information that you would LIKE to have provided to you.
Really, you need to know both ways of doing DDR quite well as a matter of
preparation for the test. Neither is difficult and shouldn't give you
much trouble beyond the simple fact that DDR is !!!TEDIOUS!!!
It is WELL KNOWN that the test is such that it will give you a requirement
and then rule out certain (or all but one) possibilities on how to
accomplish that task.
EXAMPLE: "The ISDN link should _route_ IP traffic, but don't configure IP
on the BRI interface"
Pretty much means that you HAVE to create a dialer interface doesn't it?
The lab may state to use one or the other, it may imply (from your
restrictions) to use one or the other, or it may allow you to use either.
Read it carefully and you'll be fine.
On Mon, 19 Feb 2001, Sorin Suru wrote:
>
> Without breaking the NDA, in the Lab,do you get enough information to
> distinguish between Legacy DDR vs Dialer Profile? In other words which one
> is required?
> Thank you
> Sorin
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:52 GMT-3