From: Todd White (towhite@xxxxxxxxx)
Date: Tue Feb 20 2001 - 12:42:18 GMT-3
You can use the "ip ospf hello-interval" command to change the dead
interval. Keep in mind that the dead interval is 4 times the hello
interval. For example, If the hello interval is set to 20, the dead interval
will be set to 80.
I believe this is applied to the interface and can be verified with the show
ip ospf interface command.
I hope this helps!
Todd
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Jonghwan Hyon
Sent: Tuesday, February 20, 2001 8:13 AM
To: ccie
Subject: ospf dead-interval ?
Sorry, all!
I mean how can i setup the ospf dead-intreval without use the command
"ip ospf dead-interval "?
I am tierd with this problem!!!
***********************************************
Jonghwan Hyon(jerry), CCNP/CCDP
Tel : 8242-487-4272
Fax : 8242-487-4273
Mobile : 8211-437-8883
e-mail : jerry@datacraft-korea.com
***********************************************
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:53 GMT-3