From: Liu Jianxin-qch1927 (Jianxin.Liu@xxxxxxxxxxxx)
Date: Wed Feb 21 2001 - 05:11:48 GMT-3
Group,
The senario:
PC ----- NAT (router or PIX) ------Router --------Internet -------------------
-----------Internet ------PIX ----- Server
10.1.1.1
10.2.2.2 (168.1.1.1)
the client pc use a private ip address, the server on Internet use public Inter
ent address,
But the client HAS TO (the requirement in this senario) use 10.2.2.2 to access
the server,
that's mean the packet from the pc like this:
source ip: 10.1.1.1
dest ip : 10.2.2.2
But we must change it to : source 202.2.2.2 (a pool in NAT), dest ip 168.1.1.1
.
The PIX on the server side has one static map for the server already(10.2.2.2 t
o 168.1.1.1),
So what should we do to configure the NAT on the PC side?
Any help?
Thanks,
Jianxin Liu
Invisix - Motorola and Cisco Together
e-mail: Jianxin.Liu@motorola.com
Web: http://www.invisix.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:55 GMT-3