From: Les Hardin (hardinl@xxxxxxx)
Date: Fri Feb 23 2001 - 02:51:16 GMT-3
You HAVE disabled inverse ARP for DLCI 201. Notice that PVC 201 is=20
UNUSED. That's what disabled means.
At 10:22 PM 2/22/2001 -0700, Todd White wrote:
>I am attempting to disable Inverse ARP on a frame relay segment. However, I
>am having no luck. Here are the commands I have on the serial interface:
>
>interface Serial0
> ip address 150.10.29.2 255.255.255.240
> no ip directed-broadcast
> ip summary-address eigrp 12 150.10.32.0 255.255.255.0
> encapsulation frame-relay
> ip split-horizon
> ip ospf priority 0
> no ip mroute-cache
> cdp enable
> frame-relay map ip 150.10.29.1 104 broadcast
> no frame-relay inverse-arp IP 201
> frame-relay lmi-type ansi
>
>After rebooting the router. DLCI 201 still shows up in with the show frame
>pvc command as follows:
>
>DLCI =3D 104, DLCI USAGE =3D LOCAL, PVC STATUS =3D ACTIVE, INTERFACE =3D=
Serial0
>
> input pkts 564 output pkts 814 in bytes 51880
> out bytes 117652 dropped pkts 0 in FECN pkts 0
> in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
> in DE pkts 0 out DE pkts 0
> out bcast pkts 244 out bcast bytes 69152
> pvc create time 03:59:36, last time pvc status changed 03:59:37
>
>DLCI =3D 201, DLCI USAGE =3D UNUSED, PVC STATUS =3D ACTIVE, INTERFACE =3D=
Serial0
>
> input pkts 0 output pkts 239 in bytes 0
> out bytes 66442 dropped pkts 0 in FECN pkts 0
> in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
> in DE pkts 0 out DE pkts 0
> out bcast pkts 239 out bcast bytes 66442 Num Pkts Switched=
0
>
>Any ideas out there? This seems to follow the documentation but just=
doesn't
>work. Thanks in advance for the help.
>
>Todd
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:58 GMT-3