From: Stanford Wong - CNS (stanford@xxxxxxxxxxxxxx)
Date: Mon Feb 26 2001 - 03:58:26 GMT-3
Hi Gang,
I have been working on NLSP. In particular trying to filter NLSP routes
from making it into my routing table.
All I am trying to do is filter out networks 30 and 31 with a distribute
list on router rd and it is not working. I need a sanity check that what I
am doing is okay and I don't have a bug in the IOS. The distribute list
command works great on eigrp but not on NLSP.
the routers are all in a straight line..
rc---rd
Here is a sample of the router config -
----------router rc--------
ipx routing 3000.3000.3000
ipx internal-network 3000
interface Loopback10
ipx network 30
!
interface Loopback11
ipx network 31
!
interface Loopback12
ipx network 32
!
interface Loopback13
ipx network 33
!
interface Serial 0
encapsulation ppp
ipx network 20
ipx nlsp enable
clockrate 125000
!
ipx router nlsp
area-address 20 FFFFFFF0
!
ipx router rip
no network 3000
no network 20
----------router rd config ----------------
!
ipx routing 4000.4000.4000
ipx internal-network 4000
!
interface Serial0
encapsulation ppp
ipx network 20
ipx nlsp enable
!
access-list 801 deny 30
access-list 801 deny 31
access-list 801 permit FFFFFFFF
!
ipx router nlsp
area-address 20 FFFFFFF0
distribute-list 801 in Serial0
!
ipx router rip
no network all
!
I do a clear ipx route * but the route keeps reappearing.
rd#sho ipx route
Codes: C - Connected primary network, c - Connected secondary network
S - Static, F - Floating static, L - Local (internal), W - IPXWAN
R - RIP, E - EIGRP, N - NLSP, X - External, A - Aggregate
s - seconds, u - uses, U - Per-user static
No default route known.
L 4000 is the internal network
N 30 [45][05/01] via 3000.0000.0000.0001, 742s, Se0
N 31 [45][05/01] via 3000.0000.0000.0001, 742s, Se0
N 32 [45][05/01] via 3000.0000.0000.0001, 742s, Se0
N 33 [45][05/01] via 3000.0000.0000.0001, 742s, Se0
Appreciate any pointers/comments...
stanford
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:01 GMT-3